Boom Towing Boat 9500

The SC BTW 9500 is a robust boom towing boat made of high grade marine aluminum with a single level work deck and walk around fully enclosed wheelhouse with special focus on safe navigation and low noise levels.

The displacement hull is divided into three watertight compartments equipped with separate bilge pumps. Moreover, the SC BTW 9500 has a protective rubber D100 fender. The boom towing boat is designed to operate in 5 cm (2 in) rigid ice or 10 cm (4 in) broken ice. The hull is made of seawater resistant aluminum, with 8 mm (0.3 in) plating and 6 mm (0.2 in) transom plating and welded in accordance with all workboat regulation standards.

The flat self-draining deck is painted with anti-skid epoxy. The boom towing boat is equipped with a towing post with releasable towing hook on the aft deck as well as four lifting points. The machinery is fitted in a water tight engine compartment located in the stern of the vessel. The engines are keel cooled with closed circuit cooling slings mounted inside the vessel’s hull beneath the waterline. The exhaust system is equipped with silencer/spark arrestor.

The SC BTW 9500 is built in accordance with the Finnish Maritime Association (FMA) workboats regulations, EU directives and ISO standards.


Technical Specifications

Item ID 395088
Length 9500 mm 31.2 ft
Width 3300 mm 10.8 ft
Draft 1300 mm 4.3 ft
Lightweight 7600 kg 16755 lbs
Displacement 9000 kg 19843 lbs
Bollard pull 5500 kg 12125 lbs
Crew max. 3 pers.
Engine 2 x 410 hp
Speed 12 kn

Features and Benefits

Robust displacement hull
Releasable towing hook
Singel level deck layout
Silent and ergonomic wheel house
Bipolar 24VDC electrical system
Low maintenance aluminum
Excellent sea handling

uk en_US

Warning: Unknown: write failed: Disk quota exceeded (122) in Unknown on line 0

Warning: Unknown: Failed to write session data (files). Please verify that the current setting of session.save_path is correct (/home/lamor/.system/tmp) in Unknown on line 0